We are working on a arm-port to run IPFire on Pandaboard.
This port is mainly as development and build environment.
Technichal data
- CPU: TI Omap4 (1000Mhz armv7l) Dual Core
- RAM: 1GB
- Storage: SD/SDHC-Card Slot
- 1x WLAN/Bluetooth
- 1x Fast Ethernet LAN
- 2x USB 2.0 HiSpeed
- 2x HDMI (only one Port is Suppored by IPFire)
- 2x 3.5mm Audio (in/out) not supported by IPFire
IPFire Images
To use this you need experience with Pandaboard. It is not ready for end-user nor productive use.
Video Output is not supported with IPFire.
unpack this to a SD Card with:
xzcat ipfire-2.21.2gb-ext4.armv5tel-full-coreXXX.img.xz > /dev/sd?
Ater this put it in you Pandaboard, connect Serial Console and boot it.